Deanshield Masks | Main Features
Share
Main Features
- More than 95% filtration percentage: Check the associated certificate here
- 30 Washes: Check here the associated certificate
- High level of Ergonomics: Check here the associated certificate
Design and Sizes
- Unique designs: both for adults and children. Updated periodically. Check out the prints available at this time: Adult , Children .
- Possibility of ordering personalized masks. Ask here Budget WITHOUT commitment
- Two sizes: Adult and Child: Check here the sizes of each size
Composition of Deanshield masks
- Belts - Thermoplastic elastomer
- Filter - Polypropylene and silver thread
- Outer - Polyester
- Spiderweb - Polyester
This mask contains no components made from natural rubber latex.
Country of origin
Deanshield masks are made in Spain (Alicante) with world-sourced materials.
Area of use
- Hazardous fine dust
- Water and oil based mists/sprays
- Biological risk agents group 2
Temporary Limitation of Use
- We recommend not using Deanshield Masks for more than 8 hours continuously.
Shelf Life and Storage
- 5 years from the date of manufacture
- Store in temperatures between: -4°F (-20°C) and +86°F (+30°C)
Washing and Disinfection
- Method 1: With normal detergent and water at a temperature between 60º-90º (normal washing machine cycle).
- Method 2: Soak masks in a 1:50 bleach dilution with warm water for 30 minutes. Then wash with soap and water and rinse well to remove any remaining chlorine and allow to dry.
- Method 3: Use any of the virucidal products authorized by the Ministry of Health and that have passed Standard 14476 for virucidal activity indicated in said document.
SUMMARY OF THE LABORATORY REPORT
- In vitro determination of bacterial filtration efficiency (bfe): 95.85%
- Determination of breathability (differential pressure): 23.6 (Pa / cm2)
- Determination of splash resistance pressure: 17 kPa
- Determination of a population of microorganisms in products: 17 cfu / g
Marketed under the EN 0065-1: 2020 standard.
