Deanshield Masks | Main Features

Main Features

• More than 95% filtration percentage: Check the associated certificate here
• 30 Washes: Check here the associated certificate
• High level of Ergonomics: Check here the associated certificate

Design and Sizes

• Unique designs: both for adults and children. Updated periodically. Check out the prints available at this time: Adult , Children .
• Possibility of ordering personalized masks. Ask here Budget WITHOUT commitment
• Two sizes: Adult and Child: Check here the sizes of each size

Composition of Deanshield masks

• Belts - Thermoplastic elastomer
• Filter - Polypropylene and silver thread
• Outer - Polyester
• Spiderweb - Polyester

This mask contains no components made from natural rubber latex.

Country of origin

Deanshield masks are made in Spain (Alicante) with world-sourced materials.

Area of use

• Hazardous fine dust
• Water and oil based mists/sprays
• Biological risk agents group 2

Temporary Limitation of Use

• We recommend not using Deanshield Masks for more than 8 hours continuously.

Shelf Life and Storage

• 5 years from the date of manufacture
• Store in temperatures between: -4°F (-20°C) and +86°F (+30°C)

Washing and Disinfection

• Method 1: With normal detergent and water at a temperature between 60º-90º (normal washing machine cycle).
• Method 2: Soak masks in a 1:50 bleach dilution with warm water for 30 minutes. Then wash with soap and water and rinse well to remove any remaining chlorine and allow to dry.
• Method 3: Use any of the virucidal products authorized by the Ministry of Health and that have passed Standard 14476 for virucidal activity indicated in said document.

SUMMARY OF THE LABORATORY REPORT

• In vitro determination of bacterial filtration efficiency (bfe): 95.85%
• Determination of breathability (differential pressure): 23.6 (Pa / cm2)
• Determination of splash resistance pressure: 17 kPa
• Determination of a population of microorganisms in products: 17 cfu / g

Marketed under the EN 0065-1: 2020 standard.